Monitor Audio Platinum-200 (Piano Ebony) 3G
The Platinum 200 3G is a slim and compact three-way floorstander, designed to deliver a rich, dynamic high-end performance with tight, controlled bass. It boats a MPD III transducer, a 4” RDT III midrange driver and twin 6” RDT III bass drivers.
Capable of delivering levels of bass extension and detail normally only found in the largest of floorstanding loudspeakers, the Platinum 200 3G is capable of providing an exceptionally large soundstage from a relatively diminutive form. The new MPD III transducer and RDT III mid-range and bass driver cones have refined the overall balance of the speaker and reduced distortion, while also allowing it to deliver an exceptional room-filling performance. It also benefits from a new cast outrigger and crossover mounted plinth assembly.
Key Features
Specification
System Format | 3 Way |
Frequency Response (-6 dB) | 32 Hz – 60 kHz |
Frequency Response, In-Room (-6dB) | 23 Hz – 60 kHz |
Sensitivity (2.83v @ 1m) | 88 dB |
Nominal Impedance | 4Ω |
Minimum Impedance (20 Hz to 20 kHz) | 4.0 Ohms @ 2.5 kHz |
Continuous Power Handling (RMS into 4 Ohms, Pink Noise with 6dB Crest Factor) |
300 W |
Recommended Amplifier Power (RMS into 4 Ohm, Music Signal) |
150 – 600 W |
Bass Alignment | Ported |
Port Tuning Frequency | 38 Hz |
Crossover Frequency | LF/MF: 825 Hz MF/HF: 3 kHz |
Drive Unit Complement | 2 x 6" RDT III bass driver, 1 x 4" RDT III mid-range driver, 1 x MPD III tweeter |
External Dimensions (Including Grille and Terminals (H x W x D)) |
1041.6 x 368.7 x 454.9 mm (41 x 14.5 x 17.8") |
External Dimensions (including Outrigger Feet and Spikes (H x W x D)) |
1025 x 368.7 x 454.9 mm (40.3 x 14.5 x 17.8") |
Weight (each) | 35.8 kg (78 lb 14 oz) |